Feature

MIX' Touchless

  • Stainless steel side front cover panels
  • Hot Dipped Galvanized Frame, polyurethane powder paint
  • Stainless steel bolts and screws
  • Losening belts security control device for horizontal elements
  • Control and security system at variable speed for top brush and drying lifting device
  • Stainless Steel Top Contouring Dryer. (2 x 3 kW)
  • Two Side Dryers (2 x 4 kW)
  • Contouring and tilting five positions top high pressure device with translating nozzle
  • Side high pressure with vertical translating nozzle
  • Direct Motor Gantry Drive with Variable Speed
  • Chemical Pump for Wax
  • There can be a combination of up to 6 chemicals
  • Standard Power Supply: 380 / 415 V – 50 Hz

Details

PULSE HP UNIQUE IN THE WORLD OF CAR WASH BECAUSE IT IS EQUIPPED WITH HIGH PRESSURE “MOVING” JETS
that use powder detergent with hot water, or liquid detergent with cold water,supplied directly, on the surface of the cars to be washed, by three nozzles, two of which are vertical and one horizontal at a pressure of about 120 bar. For the vertical parts each nozzle moves alternately from top to bottom, for the horizontal parts a third nozzle flows alternating from right to left in a crossbar element, which rotates on itself to keep the jet perpendicular to the vehicle bodywork.

 

DOUBLE CHEMICAL DETERGENT
acid and alkaline dispensed in two phases by means of nozzles adjustable in 2 positions.

 

HORIZONTAL CHEMICAL TO ELIMINATE THE MOSQUITOES, WITH TRANSLATING NOZZLE
to follow the profile of the car. It moves alternately from right to left inside a bar that rotates on itself to keep the jet perpendicular to the body, especially in the lower area of the car fronts.
The program stops immediately after the windshield of the cars themselves, after which the portal returns to the starting point to start the high-pressure washing cycle with the movings jets.

 

HIGH SIDE ROTATING PRESSURE IN 2 POSITIONS
with four nozzles to wash the wheels and the lower parts of cars.

 

HORIZONTAL DRYING
A special three-position deflector, orients air flow on the front vertical part and rear of cars, to improve the drying result.

 

THE HIGH PRESSURE OF THE PULSE HP
can work both individually and in combination with chemical detergents.
To significantly enhance their action, during the prewash phase, they are heated. For this purpose, the HP PULSE uses a continuous flow heater device with electronic temperature regulation.

 

UNIJET HPC COLD WATER PRODUCTION SYSTEM
With pumps, devices for dosing liquid detergent and accessories.
The module is built with a complete “plug and play” system ready for connection, supplied pre-assembled on a hot-galvanized frame with thermal insulation.

 

UNIJET HP HOT WATER PRODUCTION SYSTEM
Equipped with hot water production system, pumps, device for dosing detergent powder and accessories.
The module is built with a complete “plug and play” system ready for connection, supplied pre-assembled on a hot-galvanized frame with thermal insulation.


Technical data

Data
Maximum wash height 2.300 mm
Maximum wash width 2.300 mm
Maximum width between columns 2.450 mm
Maximum height 3.015 mm
Maximum width 3.570 mm
Rails length 9 m
Distance between rails 2850 – 3000 mm

 


Gallery


Documents

Pulse HP - Brochure
Go to Top