Feature

Multi-programmable rollover car wash

  • Sleek design.
  • Wide for ease of access.
  • Hot-dip galvanised frame.
  • Stainless steel bolts and screws.
  • Wheel washing unit with adjustable tilt.
  • Optimised and targeted distribution of the special wheel-rim cleaning product.
  • High lateral oscillating pressure with rotating nozzles.
  • System of prismatic coupling of the guiding chassis for vertical brushes.
  • Pressure and brush safety control device for towbars and bullbars.
  • Horizontal drying structure of hot-dip galvanised steel.
  • Optimised vertical drying to direct the airflow with greater precision.
  • Specially-shaped painted guide tracks.
  • Adjoining control interface with touch-sensitive programming panel.
  • New MIX-FOAM brushes with optimised design.
  • RGB traffic light with innovative “progress bar”.

Details

High-pressure systems

PULSE 1S PRO has been designed and built with the aim of reducing accidental downtime outside of scheduled maintenance. A complex structure with high rigidity, obtained with a sophisticated design, it is composed of different welded elements making it possible to limit the torsional and welding stresses that are triggered after the hot-dip galvanising process in the tank at temperatures of 450° C.

Hot-dip galvanising is the anti-corrosion protection par excellence. Today it is not enough to evaluate the cost of a product at the time of its construction. It is necessary to evaluate the cost related to its life cycle (LCA), to obtain maximum performance and the best value for money.

 

High-pressure dislodging prewash with rotating nozzles

The machine has four high impact nozzles, whose rotation is generated by the flow of the washing liquid. A pneumatic system alternately positions the rotating nozzles at different angles. The movement from top downwards makes it possible to wash the horizontal and vertical parts of cars.

 

Integrated high pressure in the wheel washer

Washing device composed of three nozzles inserted inside the brush, one of which is angled to wash the inside of the wheel arches of cars. Very effective during the wheel-washing programme, it washes inside and around areas that are difficult to reach or where the brush action is inhibited. During the entire travel of the arch, they continue to rotate also washing the lower part of the cars.

 

Brush wheel wash

The height from the ground is adjustable: as it approaches the wheels the brush is lowered towards the floor, to adapt to small-diameter rims. The holder of the wheel washer slides in the opening and closing phases by means of a pneumatic cylinder. During the wash cycle the disk brush reverses the direction of rotation. The brushes are made of a special very resistant polyethylene fibre for an effective, precise and careful wash.

 

Rotating high-pressure wheel wash

Composed of two spherical heads with a targeted jet, rotated by means of reduction gearing. Each head has four nozzles able to direct the jet in four different directions depending on the application, for better cleaning power. A device with variable angle makes it possible to direct the jets onto the wheels and side of the vehicles.

 

Wheel rim chemical cleaner

Consisting of a pair of adjustable stainless steel nozzles, mounted on both sides of the gantry in a low position. During the washing process, due to the highly corrosive nature of the product dispensed, the nozzles are activated only at the wheels. The device is powered by a special feeder pump. 

 

Polishing foam cycle

Device composed of a series of nozzles on the sides of the arch, able to deliver a special wax polish concentrate, covering the car with a layer of foam. During this operation, the water supply ramps are deactivated. The brushes are activated for a polishing process that protects the paintwork of the vehicle. The device is powered by a special feeder pump.


Technical data

Specification
MAXIMUM WASHING HEIGHT (mod. 230/260/280) 2.300 – 2.600 – 2.800 mm
MAXIMUM WASHING WIDTH 2.300 mm
MAXIMUM WIDTH WITHIN THE ARCH 2.450 mm
MAXIMUM HEIGHT OF STRUCTURE (mod. 230/260/280) 3.015 – 3.315 – 3.515  mm
MAXIMUM WIDTH OF STRUCTURE 3.560 mm
MAXIMUM WIDTH WITH SPLASHBOARDS 3.800 m
MAXIMUM LENGTH COVER SUP OUTPUT SIDE 1.970 mm
LENGTH OF TRACKS 9 – 10 m
INTERAXLE WIDTH OF TRACKS 2850 – 3000 mm
MAXIMUM POWER CONSUMED 16,0 kW
MINIMUM INCOMING WATER PRESSURE 3 bar
MINIMUM INCOMING AIR PRESSURE 8 bar

 


Gallery


Documents

Pulse 1S - Brochure

Want to know more?
Ask us.
Contact our call centre or send an email for detailed information on all our products and services. Contacts
Go to Top