Feature

The new carwash icon

  • Hot Dipped Galvanized Frame, polyurethane powder paint. Color: TITANIUM
  • Stainless steel bolts and screws
  • H.P. Horizontal Prewash with rotating nozzles
  • Two-position high pressure side pre-wash
  • Fairing cover high pressure piping
  • Losening belts security control device for horizontal elements
  • Direct Motor Gantry Drive with Variable Speed (1 inverter)
  • Control and security system at variable speed for top brush and drying lifting device (2 inverter)
  • Variable speed system for vertical brush control (2 inverter)
  • 4+4 levels Electronic Control Device for top brush pressure.
  • 4+4 levels Electronic Control Device for top brush pressure.
  • Adjustable Rebrushing Front & Rear Side
  • Bulbar – Tow Hook Safety device and pressure control
  • Brush Tilting
  • Reverse brushes rotation
  • Stainless Steel Top Contouring Dryer. (2 x 3 kW )
  • Horizontal dryer deflector
  • Two Side Dryers (2 x 4 kW)
  • Chemical Pump for Detergent
  • Chemical Pump for Wax
  • Chemical Pump fo Super Foam Bath
  • There can be a combination of up to 6 chemicals.Products tanks are included
  • Standard Power Supply: 380 / 415 V – 50 Hz
  • Carbon LED look with traffic lights
  • Carbon LED display for scrolling messages
  • Exit top covering (INOX)

Details

CONTOURING TOP HIGH PRESSURE

with eight + eight nozzles high-impact rotating, eight are activated on the forward cicle and the other eight on the return cycle.

 

HIGH SIDE ROTATING PRESSURE IN 2 POSITIONS

with four nozzles to wash the wheels and the lower parts of cars.

 

BRUSH WHEEL-WASH WITH HIGH PRESSURE

The device consisting of three nozzles inserted inside the same one, one tilted to wash the inside of the wheel fender of the car.

 

BRUSH WHEEL-WASH

adjustables from the ground. When approaching the wheels the bristle is lowered towards the floor, to fit the small diameter rims.

 

DISPENSING FOAM

Lateral oscillating device for generating and dispensing foam. Small in size but high in performance, it generates one very consistent foam with a high gripping power.

 

BRUSH INCLINATION SYSTEM

to have the vertical brushes with an angle even more consistent with the shape of the body, without increasing its pressure. It is automatically excluded on very high vehicles and on vans.

 

HORIZONTAL DRYING

A special three-position deflector, orients air flow on the front vertical part and rear of cars, to improve the drying result.

 

VERTICAL BRUSHES

MIX has designed a coupling between carriage and prismatic guide specifically targeted to be able to significantly increase the response to the stresses of vibrations during the washing steps.

 

CHEMICAL PRODUCTS CENTRAL UNIT

The central unit is very compact and has got all the functional components such as the dosing pumps and the electric valves and the chemical products to be dosed.


Technical data

Data
Maximum wash height (mod. 2.3/2.6/2.8) 2.300 – 2.600 – 2.800 mm
Maximum wash width 2.300 mm
Maximum width between columns 2.450 mm
Maximum height (mod. 2.3/2.6/2.8) 3.015 – 3.315 – 3.515  mm
Maximum width 3.560 mm
Maximum width con paraspruzzi 3.800 m
Rails length 9 – 12 m
Distance between rails 2850 – 3000 mm

 


Gallery


Documents

ikon - Brochure
Go to Top